Evaluating the performance of absolute RSSI positioning algorithm-based microzoning and RFID in construction materials tracking

High accuracy of construction materials tracking with radio frequency identification technology (RFID) is challenging to achieve. The microzoning method consists essentially of an absolute received signal strength indication (RSSI) positioning algorithm on the basis of measuring the distance of tag from antennas base. In this paper, we analyse and examine the effects of microzoning method on the performance of RFID tags. A system was set up whereby RFID tags and antennas with the microzoning method were developed and studied. The performance of the tag antennas was studied with the practical read-range measurements. The study results showed that this absolute algorithm worked reliably and was suitable for RFID applications requiring identification of positions of onsite materials and components. The results also showed that the algorithm achieved a large read range and high accuracy. The study investigates the RFID solutions for Australian LNG (liquefied natural gas) industry and was initiated by the collaboration between Woodside Energy, Curtin University, and Industrial Automation Group Pty Ltd

Spatial and Temporal Analysis on the Distribution of Active Radio-Frequency Identification (RFID) Tracking Accuracy with the Kriging Method

Radio frequency identification (RFID) technology has already been applied in a number of areas to facilitate the tracking process. However, the insufficient tracking accuracy of RFID is one of the problems that impedes its wider application. Previous studies focus on examining the accuracy of discrete points RFID, thereby leaving the tracking accuracy of the areas between the observed points unpredictable. In this study, spatial and temporal analysis is applied to interpolate the continuous distribution of RFID tracking accuracy based on the Kriging method. An implementation trial has been conducted in the loading and docking area in front of a warehouse to validate this approach. The results show that the weak signal area can be easily identified by the approach developed in the study. The optimum distance between two RFID readers and the effect of the sudden removal of readers are also presented by analysing the spatial and temporal variation of RFID tracking accuracy. This study reveals the correlation between the testing time and the stability of RFID tracking accuracy. Experimental results show that the proposed approach can be used to assist the RFID system setup process to increase tracking accuracy

Fear for external cephalic version and depression: predictors of successful external cephalic version for breech presentation at term?

Background Objective was to determine whether fear for external cephalic version (ECV) and depression are associated with the success rate of ECV in women with a breech presentation at term. Methods Prospective study conducted in the Catharina Hospital Eindhoven between October 2007 and May 2012. Participants fulfilled The Edinburgh Depression Scale (EDS) questionnaire and expressed their degree of fear on a visual analogue scale from one to ten before ECV. Obstetric factors were evaluated as well. Primary outcome was the relation between psychological factors (fear for ECV and depression EDS scores) and ECV success rate. Secondary outcome was a possible relation between fear for ECV and increased abdominal muscle tension. Results The overall success rate was 55% and was significantly lower (p < 0.001) in nulliparous women (44.3%) compared with parous women (78.0%). Fear for ECV and depression EDS-scores were not related with ECV success rate. Parity, placental location, BMI and engagement of the fetal breech were obstetric factors associated with ECV outcome. There was no relation between fear for ECV and abdominal muscle tone. Conclusion Fear for ECV and depression were not related with ECV success rate in this study. Engagement of the fetal breech was the most important factor associated with a successful ECV.Keywords: External cephalic version, Breech presentation, EDS, Depression, Psychological predictor

M & L Jaargang 21/1

Herman van den Bossche Historische tuinen en parken meer dan groen op maat. [Historcial Gardens and Parks: more than made-to-measure green Specialist Department for Historical Gardens and Parks.]Marcel M. Celis Waar de tijd van geen tel is: De vakafdeling funerair erfgoed. [When time does not count: the Funerary Heritage Division.]Walter Slock en Willem Hulstaert Als de nood het hoogst is 20 jaar vakgebied architectuur. [Specialist Department for Architecture.]Pieter Truijens Hotel Errera. Restauartie en rehabilitatie tot ambtswoning van de Vlaamse regering.Summar

Riding the techwave in an era of change: The healthcare guide to the future

FSW - Self-regulation models for health behavior and psychopathology - ou

Streamlining Digital Modeling and Building Information Modelling (BIM) Uses for the Oil and Gas Projects

The oil and gas industry is a technology-driven industry. Over the last two decades, it has heavily made use of digital modeling and associated technologies (DMAT) to enhance its commercial capability. Meanwhile, the Building Information Modelling (BIM) has grown at an exponential rate in the built environment sector. It is not only a digital representation of physical and functional characteristics of a facility, but it has also made an impact on the management processes of building project lifecycle. It is apparent that there are many similarities between BIM and DMAT usability in the aspect of physical modeling and functionality. The aim of this study is to streamline the usage of both DMAT and BIM whilst discovering valuable practices for performance improvement in the oil and gas projects. To achieve this, 28 BIM guidelines, 83 DMAT academic publications and 101 DMAT vendor case studies were selected for review. The findings uncover (a) 38 BIM uses; (b) 32 DMAT uses and; (c) 36 both DMAT and BIM uses. The synergy between DMAT and BIM uses would render insightful references into managing efficient oil and gas’s projects. It also helps project stakeholders to recognise future investment or potential development areas of BIM and DMAT uses in their projects